Powering and Systems Design
- Stability Studies
- Rig and Spar Design
- Stabilizer Systems
- Powering and Systems
- Structural Modifications
Consulting takes many forms, it may involve getting my opinion on a particular boat or project or it may include planning or concept sketches and design drawings of a required modification.My work in consulting involves studies of powering, stability, control, motion, construction and arrangements. Small craft are generally anything under about 150' in length. Most of my current work concerns boats 24m and under. I work closely with associated experts including my colleagues in B.C. at CR Engineering.
2016/03/ Current Stability Projects as of March 2016:
- Bellacra Explorer Stability Study
Fast aluminum craft, stability study following successful completion of my recommendations for structural modifications to improve performance
- Majestic Warrior Stability Study Commercial Fish Packer
- Northern Dream Stability Study and Design Modifications for Pilot House 120' Motoryacht
- IV Interceptor Stability Study 36' Commercial Troller
- Leeway Stability Study 40' Schooner
- T1 Stability Study 100' by 25' Landing Craft
- Content Stability Study 60' Motoryacht
-
Re-powering. Predicting performance with new power or propulsors.
Case study for consulting, drawings for hull modification, trim and balance, and jet installation for high-speed rescue vessel
Consulting, drawings for hull modification, trim and balance, and jet installation for Gray Marine, for their high-speed rescue vessel, Vessel Assist Nanaimo.
Hull modification and jet installation for high-speed rescue vessel
-
Systems Design
Case study for consulting, drawings for hull modification, trim and balance, and jet installation for high-speed rescue vessel
Consulting, drawings for hull modification, trim and balance, and jet installation for Gray Marine, for their high-speed rescue vessel, Vessel Assist Nanaimo.
Hull modification and jet installation for high-speed rescue vessel